D-60
Description:
D-60 Series is an AC/DC multi-output Power supply which standard model that offers the most cost-effective option when multiple voltages are required.D-60 comes in an Enclosed case in dual.We focuses on producing high-quality power adapters, and stable output.Automatic overload cut-off, over-voltage cut-off, automatic thermal cut-off, short circuit protection.
- Type and Specification
| Model | D-60A | D-60B | ||
| CH1 | CH2 | CH1 | CH2 | |
| DC Output Voltage | 5V | 12V | 5V | 24V |
| Output Voltage Range (Note:2) | ±2% | ±6% | ±2% | ±5% |
| Rated Output Current | 4A | 3A | 3A | 1.8A |
| Output Current Range | 0.3-6A | 0.2-4A | 0.3-6A | 0.2-2.2A |
| Wave And Noise (Note:3) | 75mVp-p | 150mVp-p | 75mVp-p | 150mVp-p |
| Inlet Stability(Note:4) | ±0.5% | ±1% | ±0.5% | ±1% |
| Load Stability(Note:5) | ±0.5% | ±4% | ±0.5% | ±4% |
| DC Output Power | 56W | 58W | ||
| Efficiency | 73% | 73% | ||
| Adjustable Range For DC Voltage | CH1; +10, -5% | CH1; +10, -5% | ||
| AC Input Voltage Range | 85~264VAC, 47~63Hz; 120~370VDC | |||
| Input Current | 2A/115V 1A/230V | |||
| AC Inrush Current | Cold-start current 30A//115V,60A/230V | |||
| Leakage Current | <1mA/240VAC | |||
| Overload Protection | 105%~150% Type: pulsing hiccup shutdown Reset: auto-recovery | |||
| Over-Voltage Protection | CH1: 5.75~6.75V | |||
| Temperature Coefficient | ±0.03%/°c(0~50°c)ON+5V | |||
| Setup, Rise, Hold Up Time | 200ms,50ms, 20ms | |||
| Vibration | 10~500Hz, 2G 10min,/1cycle, Period for 60min, Each axes | |||
| Withstand Voltage | Input and output internal: | |||
| Input and enclosure: 1.5KvAC, | ||||
| Output and enclosure: 0.5KvAC | ||||
| Isolation Resistance | Input and output internal: | |||
| Input and enclosure, Output and enclosure: 500VDC/100MΩ | ||||
| Working Temperature And Humidity | -10°c ~ +60°c (Refer to output derating curve), 20%~90%RH | |||
| Overall Dimension | 159×97×38mm | |||
| Weight | 0.55Kgs | |||
| Safety Standards | UL 1950 TUV EN60590 | |||
| EMC Standards | CISPR22(EN55022)class B, IEC801-2, 3, 4 IEC555-2 Verification | |||
