LPV-30
Description:
LPV-30 is a dedicated LED driving device that delivers a constant current/voltage or generates an adjustable current controlled by an external dimmer to LEDs.
Depending on its types or design concept, some of them not only have PFC capability but also can be located in harsh environments such as dusty, humid places.
LED power supplies include metal cases, plastic cases, and PCB types.
- Type and Specification
| Model | LPV-30-12 | LPV-30-24 |
| DC Output Voltage | 12V | 24V |
| Output Voltage Error | ±1% | ±1% |
| Rated Output Current | 2.5A | 1.25 |
| Output Current Range | 0-3A | 0-1.5A |
| Wave And Noise | 100mVp-p | 100mVp-p |
| Inlet Stability | ±0.5% | ±0.5% |
| Load Stability | ±0.5% | ±0.5% |
| DC Output Power | 30W | 30W |
| Efficiency | 86% | 87% |
| AC Input Voltage Range | 85-264VAC | |
| Input Current | 0.5A/115V 0.25A/230V | |
| AC Impulse Current | Cold-start current 13A/115V 26A/230V | |
| Leakage Current | <0.5mA/240VAC | |
| Over Load Protection | 105%~150% rated output power | |
| Protection: Hiccup mode | ||
| Over Voltage Protection | 13~16V | 28~32V |
| Protection: Shut down the output voltage | ||
| Short Circuit Protection | Protection: Hiccup mode | |
| Temperature Coefficient | ±0.03%(050) | |
| Setup Rise Hold-Up Time | 200ms, 100ms, 30ms | |
| Vibration | 10~500Hz, 2G 10min./1cycle, Period for 60min, Each axes | |
| Withstand Voltage | I/P-O/P: 2.5KVAC | |
| I/P-FG: 2KVAC | ||
| O/P-FG: 0.5KVAC | ||
| Isolation Resistance | I/P-O/P: 100M Ohms / 500VDC / 25 / 65% RH | |
| Working Temperature And Humidity | -10°C ~ +60°C, 20%~90%RH | |
| Store Temperature And Humidity | -20°C ~ +85°C, 10%~95%RH | |
| Overall Dimension | 220×20×30mm | |
| Weight | 0.25Kgs | |
| Safety Standards | Design refer to UL1012, EN60950-1, EN61347-1, EN-61347-2 approved | |
| EMC | EN55015, EN55022, EN55024, EN61000-2, EN61000-3, EN61547 | |
