DR-75
Description:
DR-75 series is a single output Din rail type power supply that can be installed on TS-35/7.5 or 15 DIN rails.Adopting the full range 86-264VAC input, the entire series provides an output voltage line of 5V, 12V, 15V, 24V, 36V and 48VDR-75 is a reliable switching power supply with high-quality material, durability, and safety to use.
- Type and Specification
| Model | DR-75-12 | DR-75-15 | DR-75-24 | DR-75-48 |
| DC Output Voltage | 12V | 15V | 24V | 48V |
| Output Voltage Range (Note:2) | ±2% | ±2% | ±1% | ±1% |
| Rated Output Current | 6.3A | 5A | 3.2A | 1.6A |
| Output Current Range | 0-6.3A | 0-5A | 0-3.2A | 0-1.6A |
| Wave And Noise (Note:3) | 100mVp-p | 100mVp-p | 150mVp-p | 240mVp-p |
| Inlet Stability (Note:4) | ±0.5% | ±0.5% | ±0.5% | ±0.5% |
| Load Stability (Note:5) | ±1% | ±1% | ±1% | ±1% |
| Efficiency | 76% | 76% | 80% | 81% |
| Adjustable Range For DC Voltage | 10.8~13.2V | 13.5~16.5V | 21.6~26.4V% | 43.2~52.8V% |
| AC Input Voltage Range | 85~264VAC 47~63Hz; 120~370VDC | |||
| Input Current | 1.8A/115V 0.9A/230V | |||
| AC Inrush Current | Cold-start current 30A/115V 60A/230V | |||
| Leakage Current | <3.5mA/240VAC | |||
| Overload Protection | 105%~150% Type: pulsing hiccup shutdown Reset: tuto recovery | |||
| Over-voltage Protection | 13.8~16.2V | 13.5~16.5V | 27.6~26.4V | 43.2~52.8V |
| Temperature Coefficient | ±0.03%/°c(0~50°c) | |||
| Setup, Rise, Hold up time | 1000ms, 60ms, 50ms/230V | |||
| Vibration | 10~500Hz, 2G 10min,/1cycle, Period for 60min, Each axes | |||
| Withstand Voltage | Input and output internal: | |||
| Input and enclosure: 1.5KvAC, | ||||
| Output and enclosure: 0.5KvAC | ||||
| Isolation Resistance | Input and output internal: Input and enclosure, Output and enclosure: 500VDC/100MΩ | |||
| Working Temperature And Humidity | -10°c~+60°c(Refer to output derating curve), 20%~90%RH | |||
| Overall Dimension | 55.5×125.2×100mm | |||
| Weight | 0.551Kgs 20PCS/14Kg/1.1CUFT | |||
| Safety Standards | Meet UL 1012 requirements (Not apply for the mark) | |||
| EMC Standards | Meet FCC PART 15 J Conduction class B | |||
